Here are some of the 3D models I have made, mostly in HeeksCAD as its quick and easy, for the camera track, ladder foot & lens cap I used FreeCAD for its extra features. You can rotate and zoom the models in the 3D view below.
If you find the models useful then please consider donating using the paypal button
This is a design I made of a negative holder for analogue camera film, I use it with my digital camera to scan negatives. You can see an example of how I use the negative holder here
You can download it here
This is a design I made for a bellows, it’s the track for a Kenlock “Swing & Shift” tilt shift bellows. Made from ABS it seemed to be more robust than the original hard plastic track.
You can download it here
This is a design I made for a cranking tool for a IRUS U600 single axis tractor, it takes a M8 bolt that must be then modified to be gripped by a suitable drill chuck.
You can download it here
I also made a stronger one here, haven’t tested it yet though, maybe it doesn’t fit. You can download it here
This is a shower holder, I threw out my old showerhead and forgot that it had the mount attached, I decided to knock one up.
You can download it here
This is a vacuum adapter for a mitre circular saw, the old one was pretty brittle and broke.
You can download it here
This is a lens cap for a Zenit MIR KMZ 20M lens, Due to the size of the lens and the protruding glass its a bit difficult to find a suitable lens cap, so I made one, it’s a push fit.
You can download it here
This is a design I made for a compact asthma inhaler body. It should be adjusted since it doesn’t allow the canister to fit inside the body. Also the nozzle didn’t really work as the 3D printing wasn’t capable of such small holes. It probably needs a microdrill to finish.
You can download it here
This is ladder foot. They are a bit difficult to find in the shops.
You can download it here
